Department of Electrical Engineering
College of Engineering Trivandrum


Faculty Profile

Dr. Bindu G. R.

Professor

Phone: 9446313313(M)
Email: bgr@cet.ac.in

Qualifications

 

B.Tech - College of Engineering Trivandrum, Universityof Kerala

M.Tech - College of Engineering Trivandrum, Universityof Kerala

PhD - College of Engineering Trivandrum, Universityof Kerala

Area of Interest

 

Control Systems

Professional Experience

 

25 Years

Guidance to Students
 

PhD guidance: 8 (3 awarded, 2 submitted,3ongoing)

MTech Projects guidedd: 25 (23 completed, 2 ongoing)

BTech Projects guidedd: 6

Awards/Recognitions
 

Was the MEMBER, BOARD OF GOVERNORS and EXECUTIVE COMMITTEE , APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY, KERALA
BEST TEACHER AWARD by CET-ISTE Research Awards 2007-2008
BEST TEACHER AWARD by CET-ISTE Research Awards 2008-2009
RECEIPIENT OF BEST PAPER AWARDS in International Conferences
FIRST RANK with Distinction (M Tech Degree) & Distinction (B Tech Degree)
Merit Scholarship recipient during Std X, Pre-Degree and B Tech Courses
Recipient of Gate Scholarship during M Tech course.

Membership of Professional Bodies
 
  1.  Indian Society for Technical Education, ISTE,
  2. Systems Society of India
  3. COMPUMAG Society.

Expert Lectures Delivered
 
  • Delivered an expert lecture on “Control Systems” at Mar Baselios College of Engineering and Technology, Trivandrum on 11 June 2014.
  • Delivered talk on “Introduction to Soft Computing Techniques”, in TKM College of Engineering, Kollam, on 28th April, 2014.
  • Delivered talk on “Classical Control Systems”, on 20th January 2014, during the short term course on Advanced Control System Design Techniques conducted in College of Engineering Trivandrum, 20- 24, January 2014.
  • Expert Lecture on “Control Systems”, organised by Electrical & Electronics Department under TEQIP-II in College of Engineering, Perumon, on 6th September 2013.
  • Engaged classes on “Basic Control Systems” in College of Engineering Trivandrum, for 5 days 3rd -7th , June 2013.
  • Delivered talk on “Fuzzy Logic” in the IHRD College of Engineering, Attingal.
  • Delivered talk on “Classical Control” on 16th November 2007 in the Mohandas College of Engineering Anad.
  • Delivered talk on “Finite Element Method” in the Mohandas College of Engineering Anad.
  • Delivered talk on “Finite Element Packages” in the Saint Gitts College of Engineering Kottayam.
  • Delivered talk on “Fuzzy Logic” in the Dept of Mechanical Engineering, College of Engineering Trivandrum.
  • Delivered talk on “Finite Element Method” in the Dept of Mechanical Engineering, College of Engineering Trivandrum.
  • Delivered expert Lecture on “Soft Computing” in the Amritha Institute of Technology, Karunagappally.
  • Delivered talk on “Finite Element Method” in the Dept TKM College of Engineering Kollam.
 


Important Publications
 
  1. K P P Pillai, Achuthsankar S Nair and Bindu G R, “Unbalanced Magnetic Pull in Train-Lighting Brushless Alternators with Static Eccentricity”, IEEE Transactions on Vehicular Technology, Volume 57, Issue 1, Jan. 2008 pp 120 – 126.
  2. R P Praveen, M H Ravichandran, V T Sadasivan Achari, V P Jagathy Raj, G Madhu, Bindu G R, “Design and Analysis of a Hybrid Stepper motor for Actuating the gimbal of Control Moment Gyroscope”, International Review of Electrical Engineering (IREE) Vol.5: No.4,Part A, August 2010,pp 1488-1495  
  3. K P P Pillai, Achuthsankar S Nair and Bindu G R, “Techniques for Analysis and Shape Optimization of Inductor Type Brushless Alternators used for Train-Lighting”, International Journal of AMSE, Modelling, Measurement and Control, Part A, General Physics and Electrical Applications, Volume 84, Issue 1, 2011, pp 41-60.
  4. R P Praveen, M H Ravichandran, V T Sadasivan Achari, V P Jagathy Raj, G Madhu, Bindu G R, “Optimal Design of a Surface Mounted Permanent-Magnet BLDC Motor for Spacecraft Applications”, International Review of Electrical Engineering (IREE), Volume 6, No.5, Part A, October. 2011, pp. 2318-2328.
  5. R P Praveen, M H Ravichandran, V T Sadasivan Achari, V P Jagathy Raj, G Madhu, Bindu G R, “A Novel Slotless Halbach Array Permanent Magnet Brushless DC Motor for Spacecraft Applications”, IEEE Transactions on Industrial Electronics. Volume 59, Issue 9, 2012, pp 3553-60.
  6. R P Praveen, M H Ravichandran, V T Sadasivan Achari, V P Jagathy Raj, G Madhu, Bindu G R, “Design and Analysis of Zero Cogging Brushless DC Motor for Spacecraft Applications”, "ECTI Transactions on Electrical Engineering, Electronics and Communications", Thailand. Volume 9, No.1, February 2011 pp.113-120.
  7. Hema Ramachandran and Bindu G R, “Prototype of a Desk-top Wi-Tricity System for Powering House-hold Utility Equipments”, International Journal on Advanced Science, Engineering and Information Technology, Volume 2 (2012) No. 1, pp: 49-52
  8. Hema Ramachandran and Bindu G R, “Enabling Multiple Loads through Wireless Power Transfer”, International Journal of Computer Networks and Wireless Communications (IJCNWC) Volume.2 No: 1 February 2012, pp 66-68.
  9. Hema Ramachandran and Bindu G R, “Wi-Tricity-The Wireless Future”, CSI Communications, Volume 36, Issue No:7, October 2012, pp22-23.
  10. Hema Ramachandran & Bindu G.R, “General public exposure radiation measurements in the vicinity of a wireless power transfer prototype system,”International Journal on Communications, Antenna and Propagation,(IRECAP), vol. 3  no. 3, pages 168-75, June 2013.
  11. Hema Ramachandran & Bindu G.R, “Wireless power transfer using Evanescent Signals for mobile charging”,International Journal of Scientific and Engineering Research, vol.4, issue 8, Aug.2013.
  12. Hema Ramachandran & Bindu G.R, “Modelling of System Parameters in Wireless Power transfer Systems, International Journal of Information Systems and Engineering  vol2, no1, April 2013
  13. Hema Ramachandran & Bindu G.R, “Variation in Magnetic Coupling implemented through Wireless Power Transfer”, International Journal of Applied Engineering Research, Vol 9.No 2, January 2014, pp.231-237.
  14. M S Jayasree, S Rama Iyer & Bindu G R, “Optimum Location of Distributed Generation and its Impact on Power System Stability”, International Journal of Applied Engineering Research, Volume 9, Number 16, January 2014, pp 3273-85.
  15. Hema Ramachandran & Bindu G.R ,”Modelling of Traversal of Air Gaps using Resonant Inductive Coupling", International Review of  Modelling  and Simulations Journal (IREMOS)", vol.7, no.6, pp.964-969, Italy, December2014
  16. Hema Ramachandran & Bindu G R "Pre-Determination and Experimental Verification of Voltage Regulation from the Output Equivalent Circuit in a Forced Resonant Inductive Coupled Wireless Power Transfer System", AMSE Journal on General Physics and Electrical Applications (AMSE),pp.10-29, Spain, March 2015.”
  17. Vijayalekshmy S, Bindu GR, S Rama Iyer, “A Novel Zig-Zag Scheme for Power Enhancement of Partially Shaded Arrays through Shade Dispersion”, Elsevier Journal of Solar Energy, October 2016, pp 92-102
  18. Vijayalekshmy S, Bindu G R, S Rama Iyer, “Performance Improvement of Partially Shaded Photovoltaic Arrays under Moving Shadow Conditions through Shade Dispersion Springer Publication”, ISSN 2250-2106,DOI 10.1007/s40031-015-0199-z, Journal of Institution of Engineers India, Series B. (Corps. of Electrical and Mechanical Engineers prize instituted by Institution of Engineers, India and awarded at 32nd Indian Engineering Congress, Chennai, December 2017)
  19. Vijayalekshmy S, Bindu G R, S Rama Iyer, 'Analysis of Various Photovoltaic Array Configurations under Shade Dispersion by Su Do Ku Arrangement during Passing Cloud Conditions' Indian Journal of Science and Technology, Vol 8(35), December 2015
  20.  M.S.Jayasree,  V.S.Parvathy, S.RamaIyer and G.R.Bindu “Optimum Value for Resistive Fault Current Limiter for Protection of a Power System with Distributed Generation” ECTI Transactions on Computer and Information Technology,Volume.9.No.1.May 2015
  21. Sabeena Beevi and Bindu G R, “Analysis of Nuclei Detection with Stain Normalization in Histopathology Images”, Indian Journal of Science and Technology, Vol. 8(23), September 2015
  22. Hema Ramachandran & Bindu G R, “Wireless power transmission model using coaxial helical solenoid coils for powering utility equipment”, Electric Power Components and Systems, Taylor and  Francis, vol.43, issue 18, pp.2029-2038, Philadelphia, UK, September 2015.
  23. Vijayalekshmy S, Bindu G R, S RamaIyer, “Analysis of Various Photovoltaic Array Configurations under Shade Dispersion by Su Do Ku Arrangement during Passing  Cloud Conditions”, Indian Journal of Science and Technology, Vol 8(35), DOI: 10.17485/ijst/2015/v8i35/IPL1086, December 2015
  24. Hema Ramachandran & Bindu G R, "Experimental Determination of Operating and Maximum Power Transfer Efficiencies at  Resonant Frequency in a Wireless Power Transfer System using PP Network Topology with Top coupling", Journal of The Institution of Engineers (India): Series B ,Vol 98,Issue 4, pp 393-403, August 2017.
  25. A Asok Kumar & Bindu G R, “Analysis of Single Phase Induction Motor and Switched Reluctance Motor with a view of Energy Conservation”, International Journal of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 1 (2015) pp. 2049-65
  26. A Asok Kumar & Bindu G R, “Analysis of Single Phase Induction and Switched Reluctance Motors For Domestic Appliances”, International Journal of Scientific and Engineering Research, Vol 7, Issue 6 June 2016, pp 1150-1156.
  27. A Asok Kumar & Bindu G R, “ A Comparative Investigation of the Speed Regulation Capabilities of Electric Drives for Domestic and Agricultural Applications”, Journal of Control & Instrumentation, Vol 9, Issue 1, 2018, pp1-10.
  28. Elizabeth Cherian, Bindu G R & P S Chandramohanan Nair, “Pollution impact of residential loads on distribution system and prospects of DC distribution”, Engineering Science and Technology, an International Journal (Elsevier), Vol 19, Issue 4, December 2016, pp 1655-1660
  29. Elizabeth Cherian, Bindu G R & P S Chandramohanan Nair, “A Hybrid ac/dc Low Voltage Distribution Network for Improved Harmonics Management and Energy Conservation”, Journal of The Institution of Engineers (India): Series B ,Vol 98,Issue 4, pp 1-8, June 2018 , https://link.springer.com/article/10.1007/s40031-018-0347-3

National/International Conference Proceedings

  1. Bindu G R, “An Intelligent Approach to the Design of Feed forward Controllers”, Proceedings of the National Conference on Intelligent and Efficient Electrical Systems, P S G College of Technology, Peelamedu, Coimbatore, in January 2001.
  2. Boby Philip & Bindu G R, “Discrete Event Supervisory Control of Optimal Tracking System” Proceedings of Seminar on Technological Developments for the Millennium CET, Trivandrum, from 16 - 17 March 2001, pp.374-382. 
  3. Veena Basil, Sheelu Jose & Bindu G R, “Design of Controllers for a Rotary Inverted Pendulum”, Proceedings of National Seminar on Interactive Integrated Technological Advancements, CET, Trivandrum 5-6, July 2002, pp.115-124.
  4. K P P Pillai, Achuthsankar S Nair and Bindu G R,  “Design of a Train Lighting Brushless Alternator to Minimise Harmonic Distortion and Derating”, Proceedings of 5th IEE International Conference on Computation in Electromagnetics (CEM 2004) Straford-upon-Avon, United Kingdom, April 2004, pp 105-107.
  5. K P P Pillai, Achuthsankar S Nair and Bindu G R,  “A Novel Technique to Eliminate Derating Problems in Train Lighting Brushless Alternators” Proceedings of 12th IEEE International Conference on Advanced Computing and Communication (ADCOM 2004) Ahmedabad, December 2004, pp.105-108.
  6. K P P Pillai, Achuthsankar S Nair and Bindu G R, “Analysis of No Load Induced Voltage as a Function of Static Eccentricity for Condition Monitoring in Train Lighting Brushless Alternators”, Proceedings of 28th National Systems Conference (NSC 2004), Vellore, December 2004,pp 76-80.
  7. Rajesh , Lalithambika & Bindu G R, “Design of Time Varying Hµ Controller for a Launch Vehicle Using LMI Approach”, Proceedings of NCTT-2004, CET, Trivandrum, pp. 08-11. 
  8. Pakki Bharani Chandra & Bindu G R, “Design,  Analysis  and  comparison  of  LQR,  LQG  and  H∞  Control”,  Proceedings  of  NCTT-2004,  CET, Trivandrum, pp. 12-18. 
  9. K P P Pillai, Achuthsankar S Nair and Bindu G R,  “An Investigation of Unbalanced Magnetic Pull as a Function of Static Eccentricity in Inductor Type Brushless Alternators”, Proceedings of IEE International Conference on Energy, Information Technology & Power Sector, (PEITSICON 2005), at Kolkata, January 2005.
  10. K P P Pillai, Achuthsankar S Nair and Bindu G R, “Novel Numerical Techniques for Determination of UMP and Condition Monitoring of Train Lighting Brushless Alternators with Static Eccentricity”, Proceedings of the 15th International Conference on Computation of Electromagnetic Fields (COMPUMAG 2005) at Shenyang, China, during 26-30 June 2005, Vol 1, pp 78-79.
  11. K P P Pillai, Achuthsankar S Nair and Bindu G R, “Analysis of Train Lighting Brushless Alternator with Skewed Rotor for Harmonic Minimization”, Proceedings of the 7th International Power Engineering Conference 2005 (IPEC 2005), to be held at Singapore during Nov 29-Dec 2, 2005.
  12. Pakki Bharani Chandra, Gopaljee & Bindu G R, “LQR control of wing rock motion and robustness analysis using Kharitonov's theorem," Proceedings of second National conference, CISCON-2005, MIT, Manipal, Karnataka, Nov-2005, pp. 144-149
  13. Pakki Bharani Chandra, Gopaljee & Bindu G R, “Mixed sensitivity H∞ Control of wing rock motion and model order reduction using Hankel norm order reduction”, Proceedings of NCTT-2005, CET, Trivandrum, Nov-2005, vol.2, pp.29-34.
  14. Jyothi Janardanan, Jayakumar M & Bindu G R, “Robust Longitudinal Controller Design for an Unmanned Tailless Aircraft”, Proceedings of NCTT-2005, CET, Trivandrum, Nov-2005, vol.2, pp.24-28.
  15. Suma Narayan, Asha P Nair & Bindu G R, “Non linear and Robust Controller Design for the Descent Phase of Reusable Launch Vehicle”, NCTT-2005, CET, Trivandrum, Nov-2006.
  16. K P P Pillai, Achuthsankar S Nair and Bindu G R, “Analysis of Unbalanced Magnetic Pull in Train-Lighting Brushless Alternators with Skewed Rotor under Static Eccentricity and Conical Rotor Motion", Proceedings of the 17th International Conference on Electrical Machines (ICEM 2006), Crete island, Greece, September 2006, pp 46-7.
  17. Jyothi Janardanan, Jayakumar M & Bindu G R, “Robust Longitudinal Controller Design for an Unmanned Tailless Aircraft”, 6th Proceedings of 6th AIAA Aviation Technology Integration and Operations Conference, September 25-27, 2006, Kansas, USA.
  18. Pakki Bharani Chandra, Gopaljee & Bindu G R, "Control  of  nonlinear  wing rock  motion  using  augmented  feedback  linearization  and  LQR  control," Proceedings  of  International  conference  on  Advanced  Technologies  on  Telecommunication  and  Control engineering, ATTCE 2006, Malaysia, Aug-2006,pp.41
  19. K P P Pillai, Achuthsankar S Nair and Bindu G R , “A Strategic Road-Map To Developments In Engineering Education in India”, at ICEER 2007,the International Conference on Engineering Education and Research organized by Victoria University & International Network for Engineering Education and Research (iNEER), at Melbourne, Australia December 2-7, 2007.
  20. R P Praveen, M H Ravichandran, V T Sadasivan Achari & Bindu G R , “Design and Analysis of Hybrid Stepper Motor using Finite Element Analysis” at the 31st National Systems Conference, Manipal Institute of Technology, Manipal, Karnataka, December 14-15, 2007.
  21. R P Praveen, M H Ravichandran, V T Sadasivan Achari & Bindu G R , “Design and Analysis of Hybrid Stepper Motor for Spacecraft Applications” at the 8th National Conference on Technological Trends, November 2007, CET, Trivandrum, pp. EE 71-75.
  22. R P Praveen, M H Ravichandran, V T Sadasivan Achari , “Design and Analysis of Hybrid Stepper motor using Finite Element Analysis”', Proceedings of 31st National Systems Conference, December. 2007, Page(s): 87 -88.
  23. R P Praveen, M H Ravichandran, V T Sadasivan Achari, Bindu G R,“Improved Design and Performance Optimization of Hybrid Stepper Motor for Spacecraft Applications” (contest paper for Young Scientist Award) Proceedings of the 20th Kerala Science Congress, 28-31, January 2008, pp.407-410.
  24. K P P Pillai, Achuthsankar S Nair and Bindu G R , “Issues and Concerns in the Electromagnetic Design of Special Electrical Machines by Finite Element Method” in the Proceedings of the World Automation Congress2008, Sept 28-Oct 2, 2008, Hawai, USA.
  25. Pakki Bharani ChaLekshmi Suresh, Rani Radhakrishnan & Bindu G R,“Decoupling controller for RLV” in the Proceedings of NCTT 2010, CET, Trivandrum.

  26. R P Praveen, M H Ravichandran, V T Sadasivan Achari, V P Jagathy Raj, G Madhu, Bindu G R “Design and Finite Element Analysis of Hybrid Stepper motor for Spacecraft Applications”, Proceedings of IEEE International Electric Machines and Drives Conference (IEMDC), Miami, U.S.A, May. 2009, Page(s): 1051 -1057. (Number of Citations : 2)

  27. Naveena P S, Asha P Nair & Bindu G R, “Control Allocation of Reaction Control Jets and Aerodynamic Control surfaces with and without actuator Dynamics”  Proceedings of NCTT 2010, CET, Trivandrum.
  28.  Divya Vijay & Bindu G R, “A Wavelet-Based Multiresolution PID Controller”, Proceedings of the International Conference on System Dynamics and Control , Manipal Institute of Technology Manipal, Karnataka,19-22 August 2010.
  29. R P Praveen, M H Ravichandran, V T Sadasivan Achari, V P Jagathy Raj, G Madhu, Bindu G R , “Design and Analysis of Enclosed Rotor Halbach Array Brushless DC motor for Spacecraft Applications”, Proceedings of IEEE International Conference on Electrical Machines 2010 (ICEM2010) held at Rome, Italy on September 6-8, 2010, pp 1-6 (Number of Citations : 3).
  30. R P Praveen, M H Ravichandran, V T Sadasivan Achari, V P Jagathy Raj, G Madhu, Bindu G R , “Design and Analysis of Zero Cogging Brushless DC motor for Spacecraft Applications”, Proceedings of IEEE International ECTI-CON 2010 Conference ,Chiang Mai, Thailand,  May. 2010, Page(s):254 -258. (Number of Citations : 3)
  31. R P Praveen, M H Ravichandran, V T Sadasivan Achari, V P Jagathy Raj, G Madhu, Bindu G R , “A Novel Slotless PMBLDC Motor for precise positioning Applications”, Proceedings of IEEE International Conference on Communication, Control and Computing Technologies (ICCCCT), Kanyakumari, India, October 7-9. 2010, pp.250-254.
  32. R P Praveen, M H Ravichandran, V T Sadasivan Achari, V P Jagathy Raj, G Madhu, Bindu G R , “Optimal Design of a Surface Mounted Permanent Magnet BLDC Motor for Spacecraft Applications”, Proceedings of IEEE International INDICON 2010 Conference, Kolkata, India during December 2010.
  33. R P Praveen, M H Ravichandran, V T Sadasivan Achari, V P Jagathy Raj, G Madhu, Bindu G R ,“Optimal Design of a Surface Mounted Permanent-Magnet BLDC Motor for Spacecraft Applications”, Proceedings of IEEE International Conference on Emerging Trends in Electrical and Computer technology (ICETECT), Kanyakumari, India, March. 2011, pp.413-419.
  34. Divya Vijay, Asha P Nair & Bindu G R, “Attitude Control for Low Lift/Drag Re-Entry Vehicle”, Proceedings of NCTT 2011, CET, Trivandrum.
  35.  Sunil Kumar K, Jayakumar M  & Bindu G R “Estimation of Longitudinal Aerodynamic Parameters of a Technology Demonstrator Aircraft using Maximum Likelihood Algorithm”, Proceedings of NCTT 2012, CET, Trivandrum.
  36. Mathew Abraham, Rani Radhakrishnan & Bindu G R,  “Fast Active Fault Tolerant Control for Actuator Fault in Launch Vehicle based on Adaptive Fault Diagnosis Observer”, Proceedings of NCTT 2012, CET, Trivandrum.
  37. Ashni George & Bindu G R, “Effective harnessing of wind energy using pitch controller”, Proceedings of the IEEE International Conference on Green Technology, Trivandrum, during Dec 18-20, 2012.
  38.  Sunil Kumar K, Jayakumar M & Bindu G R, “Estimation of Longitudinal Aerodynamic Parameters of a Technology Demonstrator Aircraft using Modified Maximum Likelihood Algorithm”, Proceedings of the IEEE International Conference on Computational Intelligence and Computing Research (2012 IEEE ICCIC)  December 18 to December 20, 2012, at Coimbatore.
  39. Hema Ramachandran & Bindu G.R, “Wireless Charging of Lighting Gadgets using Low Q Resonant Coupling” Proceedings of the International Conference on Advances in Computing, Communications and Informatics, Chennai, August 4, 2012.
  40. Hema Ramachandran & Bindu G.R, “The Prominence of Lead-Wire Capacitance in WiTric Power Transfer Systems”, Proceedings of the 2nd International Conference on Emerging Technology Trends in Advanced Engineering Research, February 21, 2012.
  41. Hema Ramachandran & Bindu G.R, “Prototype of a desktop WiTricity System for Powering household Utility Equipments” Proceedings of the 2nd International Conference on Advanced Science, Engineering and Information Technology held at Kuala Lumpur, Malaysia, December 13, 2011.
  42. Hema Ramachandran & Bindu G.R, “Wireless powering of Utility Equipments in a  Smart Home Using Magnetic Resonance”, Proceedings of the IEEE International Conference on Recent Advances in Intelligent Computational Systems (RAICS), 19-21,Dec 2013.
  43. Hema Ramachandran & Bindu G.R, “Modelling of System parameters in Wireless Power Transfer Systems”. Proceedings of the International Conference ASCENT 2013, Malaysia, 12th April 2013. (Paper won the Best paper award)
  44. Hema Ramachandran & Bindu G.R, “Evanescent coupling method of wireless power transfer for mobile charging”. Proceedings of the International Conference on global innovations in Technology and Sciences, ICGITS , Aug 2013.
  45. Hema Ramachandran & Bindu G.R, “Radiation Studies of Electromagnetic fields of a Witricity Powered Mobile charger System Environment”,Proceedings of the Kerala Science Congress, Technopark, Trivandrum Jan 2013.
  46. Ashni George, Preetha G & Bindu G R, “Nonlinear Theta-D Control Approach for the Lateral Dynamics of Re-entry Vehicle”, Proceedings of NCTT 2013, CET, Trivandrum.
  47. Vishnu M, Lalithambika & Bindu G R, “Terminal Guidance Optimization for a Launch Vehicle with Explicit Guidance Scheme”, Proceedings of NCTT 2013, CET, Trivandrum.
  48. Bynu Benjamin & Bindu G R, “Longitudinal Guidance and Control of Re-entry Vehicle in the Approach and Landing phase”, Proceedings of the International Conference on Power, Signals, Control and Computations, EPSCICON, 9-11, January 2014, Thrissur.
  49. Bynu Benjamin Chirayath, Bindu G. R and Rajesh Arora, “Optimal Station Keeping and Reconfiguration of Spacecrafts Flying in Formation”, Proceedings of the National Conference on Technological Trends, NCTT August 2014, Trivandrum.
  50. Abhijith Mohan, Bindu G R & Ajith Gopi, “Performance Improvement of Solar PV Plant using Advanced Control Techniques”, Proceedings of the National Conference on Technological Trends, NCTT August 2014, Trivandrum.
  51. Harish P, Bindu G R & Jayakumar M, “Fault Detection in Electrohydraulic Actuator System Using EKF”, Proceedings of the National Conference on Technological Trends, NCTT August 2014, Trivandrum.
  52. Abhijith Mohan, Bindu G R & Ajith Gopi, “Performance Improvement of Solar PV Plant using Ripple Correlation Technique Combined with Adaptive Control”, Proceedings of ICETREE -2014 , pp 343-50, August 2014 , (published by Elsevier, India), Kollam.
  53. Vijayalekshmi S, Bindu G R & Rama Iyer, “Estimation of Power Losses in Photovoltaic Array Configurations under Moving Cloud Conditions”, Proceedings of the Fourth International Conference on Advances in Computing and Communications, ACC 2014, August 2014, Cochin.
  54. Dr G R Bindu & Hema Ramachandran,” Issues and Concerns in E-learning for Engineering Education in India”, Proceedings of ICETREE -2014 , pp 284-88, August 2014, (published by Elsevier, India), Kollam.
  55. Prajeesh P Prabhakaran, Bindu G R, ”Vibration Reduction in Switched Reluctance Motor Drive by Fuzzy –PID Control Based on Finite Element Model”, Proceedings of ICETREE -2014 , pp 251-56, August 2014,  (published by Elsevier, India), Kollam.
  56. Vijayalekshmi S, Bindu G R & Rama Iyer, “Estimation of Power Losses in Photovoltaic Array Configurations under Passing Cloud Conditions”, Proceedings of the World Congress on Engineering 2014 Vol I, pp 270-275, WCE 2014, July 2 - 4, 2014, London, United Kingdom
  57. Vijayalekshmy S, Bindu GR, S Rama Iyer, 'Enhanced Power Generation in Partially Shaded Solar Arrays by Su Do Ku Technique of Panel Placement under Moving Cloud Condition',, IEEE International Conference ICICICT 2017, Kannur
  58.  Vijayalekshmy S, Bindu G R, S Rama Iyer, 'Power Enhancement of Zig-Zag and Su Do Ku Schemes in a Partially Shaded Photo Voltaic Array under Static Shading Conditions', IEEE International Conference i-PACT, VIT Vellore, April 2017 (Best paper award)
  59. Vijayalekshmy S, Bindu GR, S Rama Iyer, 'A Novel Approach for Peiformance Improvement of Partially Shaded Solar Arrays", IEEE Intemational Conference on Energy Efficient Technologies Sustainability -ICEETS-16, April 2016, Nagercoil, pp-122-129.
  60.  Vijayalekshmy S, Bindu G R, S Rama Iyer, 'Power Enhancement of Partially Shaded Solar Arrays under Moving Illumination Conditions Through Shade Dispersion', IEEE International Conference on Signal Processing, Informatics, Communication and Energy Systems 2015, (IEEE SPICES 2015), NIT Calicut.
  61.  Vijayalekshmy S, Bindu G R, S Rama Iyer, 'Performance of Partially Shaded Photovoltaic Array Configurations under Shade Dispersion', IEEE Conference- International Conference on Advances in Green Energy , ICAGE2014, December 2014, Trivandrum
  62. Vijayalekshmy S, Bindu GR, S Rama Iyer' Estimation of Power Losses in Photovoltaic Array Configuroti()J1s under Passing Cloud Conditions', IEEE Conference - Fourth International Conference on Advances in Computing and Communications - ICACC 2014, Cochin, August 2014, pp 366-369
  63. Vijayalekshmy S, Bindu GR, S Rama Iyer' Analysis of Various Photovoltaic Array Configurations under Shade Dispersion by Su Do Ku Arrangement during Passing Cloud Conditions' ICSCASE 2015, Nagercoil
  64.  Sabeena Beevi, Madhu S Nair & Bindu G R, “Automatic segmentation and classification of mitotic cell nuclei in histopathology images based on active contour model”, Proceedings of IEEE International Conference on Contemporary Computing (IC3I), 2014, pp740-744.
  65.  Sabeena Beevi, Madhu S Nair & Bindu G R, “Detection of Mitotic Nuclei in Breast Histopathology Images using Localised ACM and Random Kitchen Sink based Classifier”, Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society-EMBC 2016 , IEEE EMBS, pp2435-2439,Florida, USA”
  66. Sabeena Beevi, Madhu S Nair & Bindu G R, “Analysis of Nuclei Detection with Stain Normalisation in Histopathoilogy Images”, Proceedings of the International Conference on Soft Computing in Applied Science and Engineering (ICSCASE), 2015, pp 1-5 (BEST PAPER AWARD)
  67. A Asok Kumar, Bindu G R & Dinesh Gopinath, “Performance Analysis of Single Phase Induction Motor and Switched Reluctance Motor used in Domestic Appliances with a view of Energy Conservation”, IEEE International Conference (ECTICON 2014), May , Thailand
  68. A Asok Kumar, Bindu G R,“ Energy Efficient Drive System for Domestic and Agricultural Applications: A Comparative Study of SPIM and SRM Drives”, IEEE International Conference( ICIT 2018), February 2018, at Lyon, France
  69. Parvathi M L, G Sreedevi, A Asok Kumar & Bindu G R, “ Three Stage Commutation Technique for Vibration Mitigation in Switched Reluctance Machine”, 17th National Conference on Technological Trends, June 2017.
  70. G. R. Bindu and J. Basheer, “Determination of unbalanced magnetic pull due to rotor static eccentricity and conical motion in three phase induction motors,” National Conference on Emerging Trends in Power, Energy and Control, vol. 1, pp. 124–129, August 2016.
  71. G. R. Bindu and J. Basheer, “A novel strategy for the control of unbalanced magnetic pull due to rotor eccentricity in three phase induction motors,”National conference on Technological trends, August 2016.
  72. G. R. Bindu and J. Basheer, “A novel technique to arrest unbalanced magnetic pull due to conical motion in three phase induction motor using feedforward control," International conference on Nascent Technologies in Engineering, January 2017
  73. G R Bindu, Jasna Basheer & Athira Venugopal, “Analysis and control of rotor eccentricity in a train-lighting alternator”, 2017 IEEE International Conference on Power, Control, Signals and Instrumentation Engineering (ICPCSI),September 2017.
  74. Elizabeth Cherian , Bindu G R & P S Chandramohanan Nair, “Power Quality Enhancement by DC Distribution”, Proceedings of the 14 th International Conference on Renewable Energy and Power Quality , ICREPQ 2016,May at Madrid, Spain, Vol 1 , No:4, pp 791-795.
  75. Elizabeth Cherian , Bindu G R, “Power Quality Improvement in Distribution System using Hybrid ac/dc Configuration”, IEEE International Conference on Power, Control, Signals and Instrumentation Engineering (ICPCSI), Chennai, pp 1436-1439, September 2017
  76. Elizabeth Cherian , Bindu G R, “ Minimising Harmonics and Transformer Derating in Low Voltage Distribution Networks by Dc Distribution”, IEEE International Conference on Emerging Trends and Innovations in Engineering and Technological Research (ICETIETR), Kochi, July 2018.
  77. Bindu G. R., Basheer J, “ A novel control scheme to mitigate unbalanced magnetic pull due to eccentric rotor in three phase induction motors”, Proceedings of the International Symposium on Power Electronics, Electrical Drives, Automation and Motion,pp 7-12, Amalfi, Italy, June 2018.